Maruti Suzuki Brezza Rear Side Window Louvers (2022+) – Glossy Black C-Pillar Quarter Glass Shutter Covers (Pair) | Automotive Dudes

Give Your Brezza an Aggressive, Wide-Shoulder Urban Stance

Break away from the plain factory side glass and give your compact SUV a sharp, track-inspired edge. The Automotive Dudes Maruti Suzuki Brezza Rear Side Window Louvers are custom-molded to match the upright, muscular C/D-pillar contours of the 2nd Generation Brezza (2022+), instantly turning the side profile into a bold, street-ready build.

Precision-crafted from automotive-grade ABS plastic and pre-finished in an ultra-deep Piano Gloss Black, these aerodynamic shutter slats break up flat window lines, enhance rear cabin privacy, and shield interior plastics from harsh direct sunlight. Designed to withstand Indian highway speeds and harsh summer heat with zero drilling or permanent modifications.

Why Choose Automotive Dudes Brezza Louvers?

• 2nd Gen Brezza Custom Fit: Precision-scanned specifically for the 2022+ Brezza rear quarter window glass for a seamless, edge-to-edge factory overlay.

• Aggressive Aerodynamic Slatting: Multi-slot sports vents add muscular depth and visual width to your SUV's rear quarter panels.

• Deep Piano Gloss Finish: Coated with UV-resistant high-gloss clear coat to prevent fading, chalking, and yellowing under direct sun exposure.

• All-Weather ABS Build: Built from shatterproof, heat-resistant automotive ABS that resists vibration, stone chips, and automatic car washes.

• Sun & Cabin Glare Shield: Blocks angled sun rays to help reduce rear cabin temperatures and keep upholstery protected from UV degradation.

• Damage-Free 3M Installation: Pre-lined with high-bonding automotive double-sided acrylic foam tape for a vibration-proof fit without drilling, cutting, or rubber trim removal.

Technical Specifications

• Vehicle Compatibility: Maruti Suzuki Brezza (2nd Gen: 2022, 2023, 2024, 2025, 2026+ — All Trims: LXi, VXi, ZXi, ZXi+)

• Placement: Rear Quarter Side Windows / C-Pillar Glass (Left & Right Pair)

• Material: High-Density Automotive ABS Plastic

• Finish: Ultra Piano Gloss Black

• Installation Type: Direct Paste-On Overlay (Pre-Applied Heavy-Duty 3M Tape)

• Package Contents: 2x Rear Quarter Window Louver Panels (Driver & Passenger Side)

5-Minute DIY Installation Guide

1. Clean & Prep: Wipe down the rear quarter glass thoroughly using an isopropyl alcohol wipe or dedicated glass cleaner. Ensure the glass is 100% free of dirt, wax, polish, or ceramic coating residue.

2. Dry Fit: Hold both louvers up against the window frames to preview alignment and confirm clean corner margins before peeling the tape liner.

3. Heat the Adhesive (Recommended): For maximum initial bonding strength, lightly warm the pre-applied double-sided tape using a heat gun or hairdryer for 10–15 seconds.

4. Align & Mount: Peel back the protective tape film, align the louver flush with the glass edge, and apply firm, even pressure along all edges for 60 seconds.

5. Cure Time: Keep the car dry and avoid washing or high-speed highway driving for the first 24 hours while the adhesive fully cures.